Sun Shade Sail Canopy Pole LEG
Diameter 48.3

1.5m – 6m galvanised no-rust

Planning Your INTELROLL Sail Shade Structure

When planning your INTELROLL sail shade structure, start by visualizing the area you wish to cover and the design you envision. If you haven’t settled on a design yet, consider the following ideas for single or multiple INTELROLL sail configurations.

Key Considerations:

1. **Attachment Points**:
– **Existing Structures**: Attach your INTELROLL sail shade to sturdy existing structures like your house or garage.
– **Posts**: If existing structures are not suitable, you’ll need to install posts to support the INTELROLL sail shade.

2. **Usage Duration**:
– Decide whether you plan to leave the INTELROLL shade up for extended periods or take it down as needed.

3. **Rainwater Runoff**:
– Install at least one corner of the INTELROLL sail shade lower than the others to ensure proper rainwater runoff.
– Ensure the INTELROLL sail is taut and positioned at a minimum 30-degree angle to prevent water accumulation, which can damage the fabric.

Positioning Your INTELROLL Sail Shade

Identify strong anchor points for each corner of the INTELROLL sail shade. These points must withstand the tension of the INTELROLL sail material and additional wind stress. Possible anchor points include:

– A wall or sturdy beam
– A suitable tree
– A wooden post (minimum 100mm diameter) set in the ground
– A metal pole (minimum 48mm diameter) set in the ground
– A metal pole (minimum 48mm diameter) fitted into a ground sleeve

Fixing points should be at least 2.4 meters above the ground and must be robust enough to handle the full weight of the INTELROLL sail and wind pressure. If unsure, consult a builder or structural engineer.

Supporting Your INTELROLL Sail Shade

**Pole Support**:
– Use 48mm wide, 4mm thick galvanized steel poles, which can be painted if desired.
– Angle the posts away from the center of the INTELROLL sail by at least 10 degrees for added strength and stability.

**Installation for Different Grounds**:
– **Firm Ground**:
– Lay a 100mm depth of 20mm gravel at the post base.
– Add concrete and brace the post at an angle.

– **Soft Ground**:
– Pour a 100mm depth of concrete at the hole’s bottom to form a solid pad.
– Let it set, then add gravel at the post base.
– Add concrete and brace the post at an angle.

**Constructing Pole Footings**:
– For INTELROLL sail shades up to 5 meters, footings should be 400mm square and 800mm deep.
– For larger shades, increase the footing size to 400mm x 1200mm.
– Ensure concrete is well-packed around the pole, sloping slightly outward at the top to prevent water collection.
– Allow at least 48 hours for the concrete to set completely before attaching the INTELROLL sail shade. Avoid using rapid-set concrete.

By following these guidelines, you can ensure a sturdy, reliable INTELROLL sail shade structure that provides effective shade and withstands various weather conditions.